BeaglePilot:


Several commercial products spinned out of BeaglePilot. The following products are the recommended choices:


BeaglePilot project aims to create the first Linux-based autopilot for flying robots using the BeagleBone and the BeagleBone Black as the "hardware blueprint". For this purpose the project will focus on integrating ArduPilot (most popular autopilot) in the BeagleBone (Black).

The conclusion of this work is presented in a final publication: Towards an Open Source Linux autopilot for drones accepted at LibreCon 2014:

How to cite our work

Conventional citation
V. Mayoral,  S. Bharat, P. Rowse, A. Hernández, B. Mazzolai. "Towards an open sourcelinux autopilot for drones". "LibreCon 2014", 10 2014.
BibTex format
@conference{beaglepilot,
  author       = {V\'{i}ctor Mayoral Vilches, Siddharth Bharat Purohit, Philip Rowse, Alejandro Hernández Cordero, Barbara Mazzolai}, 
  title        = {Towards an Open Source Linux autopilot for drones},
  year         = 2014,
  month        = 10,
  organization = {LibreCon 2014},
}

Comments

We'd be happy to address any comments. Please submit a new issue.


18th of August 2014, first flight with BeaglePilot with a Plane, performed in Australia by Andrew Tridgell.


Status

The following table sumarizes the driver development status. Feel free to grab one and help us further develop this:

Milestone Status
ArduPilot running in the BBB (I2C connected sensors) Ok
Device Tree for the PXF WIP
MPU6000 SPI userspace driver Ok
MPU9150 I2C userspace driver Ok
LSM9DS0 SPI userspace driver Coded
MPU9250 SPI userspace driver Coded
MS5611 I2C/SPI userspace driver Ok
GPIO userspace driver Ok
I2CDriver multi-bus aware WIP
AP_InertialSensor_Linux ToDo
PRU PWM driver  Ok (issue with the PREEMPT_RT kernel)
MPU6000 SPI kernel driver WIP
MPU9150 I2C kernel driver ToDo
LSM9DS0 SPI kernel driver ToDo
MPU9250 SPI kernel driver ToDo
MS5611 I2C/SPI kernel driver WIP

Status: Ok, Coded (needs test), WIP (work in progress), Issue, ToDo

GSOC Frame:

Timeline Anuj Deshpande Siddharth Bharat Purohit Víctor Mayoral Vilches
Community Bonding (21st April - 19th May 4 weeks) Have already begun interacting with the community on ardupilot-discuss, #beaglepilot.Would be possible to being working in the “community bonding” period. Coding started and trying to pull the timeline as up as possible leaving voids to do more :) Already started coding and the discussion at #beaglepilot (Freenode). The mentors provided great feedback and tutorials to get started. The goal will be to get familiar with ArduPilot and start coding drivers (userspace ones at the beginning) for the hardware to be used (PixHawk Fire Cape).
May 19th - May 25th Device tree generation. Create a test script to check if all pins required have been initialised to their appropriate modes. use beaglebone pru driver lib to upload firmware using remotproc Hardware drivers coding (userspace) over the ArduPilot code (Linux kernel with RT_PREEMPT patches applied).
May 26th - June 1st PPM & PWM generation Create data handling library for PRU0, PRU1 and ARM Hardware drivers coding.
June 2nd - June 8th PPM & PWM generation " Code of hw tests. Make sure that all the hardware interfaces properly.
June 9th - June 15th PPM & PWM generation Port Starterware Library to PRU Realtime comparison: stock kernel userspace vs RT_PREEMPT kernel userspace (desirable to include tests with Xenomai if the time allows it)
June 16th - June 22nd PPM & PWM generation " ROS integration through MAVLink (using mavlink_ros ROS package). This first task is expected to be straightforward.
June 23rd - June 29th Mid-Term evaluations " (Midterm Eval) ROS bridge coded directly in the ArduPilot code as an optional module.
June 30th - July 6th PPM-SUM Create driver library (along with firmware) for Pixhawk Firecape sensors(PRU side) ROS bridge coded directly in the ArduPilot code as an optional module.
July 7th - July 13th PPM-SUM " ROS-Ardupilot tests.
July 14th - July 20th SPI using the PRU Create driver library for Pixhawk Firecape sensors(ARM side) i.e. Ardupilot AP_HAL compatible IDE integration, web programming. Probably Codiad or Cloud9 (http://erlerobot.com/blog/programming-a-flying-robot-in-the-browser/).
July 21st - July 27th SPI using the PRU Intensive testing of Pixhawk Firecape with Ardupilot ported Security review of Ardupilot running on a RT_PREEMPT patched kernel.
July 28th - August 3rd GCS Final housekeeping Security issues.
August 4th - August 10th GCS Live Test and Documentation Overall review an tutorials development.
August 11th - August 18th Final evaluations Live Test and Documentation Wrap-up, documentation and delivery.

Test Platforms:

BeaglePilot project is currently available through the following solutions:

Acknowledgements

This work would not have been possible without the support of many people such as Kevin Hester, Lorenz Meier, Ben Nizette, Jimmy Johnson and Daniel Frenzel. Special thanks to the APM developers and particularly to Andrew Tridgell which has been our main source of support and guidance. We would also like to metion the fantastic support offered by Beagleboard.org developers Jason Kridner, Pantelis Antoniou and their community. The authors would also like to convey thanks to Beagleboard.org, Google, 3DRobotics and Erle Robotics for providing financial means and material.

Communication & Resources:

Visit our IRC channel



BeaglePilot:


几个商业产品从BeaglePilot中脱颖而出。以下产品 是推荐的选择:


BeaglePilot项目旨在使用BeagleBone和BeagleBone Black作为硬件蓝图来制作首款基于Linux的自动驾驶仪。为此,该项目将重点放在BeagleBone(Black)中集成ArduPilot(最受欢迎的自动驾驶仪)。

这项工作的结论将在最终的出版物中发表:打开公开源Linux无人机的自动驾驶仪 LibreCon 2014 上接受:

如何引用我们的工作

Conventional citation
V. Mayoral,  S. Bharat, P. Rowse, A. Hernández, B. Mazzolai. "Towards an open sourcelinux autopilot for drones". "LibreCon 2014", 10 2014.
BibTex format
@conference{beaglepilot,
  author       = {V'{i}ctor Mayoral Vilches, Siddharth Bharat Purohit, Philip Rowse, Alejandro Hernández Cordero, Barbara Mazzolai},
  title        = {Towards an Open Source Linux autopilot for drones},
  year         = 2014,
  month        = 10,
  organization = {LibreCon 2014},
}

Comments
我们很乐意提出任何意见。请提交新问题


2014年8月18日,首轮搭载飞机BeaglePilot,由Andrew Tridgell在澳大利亚演出。


状态

下表概述了驱动程序开发状态。随意抓一个,帮助我们进一步发展:

Milestone Status
ArduPilot running in the BBB (I2C connected sensors) Ok
Device Tree for the PXF WIP
MPU6000 SPI userspace driver Ok
MPU9150 I2C userspace driver Ok
LSM9DS0 SPI userspace driver Coded
MPU9250 SPI userspace driver Coded
MS5611 I2C/SPI userspace driver Ok
GPIO userspace driver Ok
I2CDriver multi-bus aware WIP
AP_InertialSensor_Linux ToDo
PRU PWM driver  Ok (issue with the PREEMPT_RT kernel)
MPU6000 SPI kernel driver WIP
MPU9150 I2C kernel driver ToDo
LSM9DS0 SPI kernel driver ToDo
MPU9250 SPI kernel driver ToDo
MS5611 I2C/SPI kernel driver WIP

状态:确定编码(需要测试), WIP (正在进行中)代码>, ToDo

GSOC框架:

Timeline Anuj Deshpande Siddharth Bharat Purohit Víctor Mayoral Vilches
Community Bonding (21st April - 19th May 4 weeks) Have already begun interacting with the community on ardupilot-discuss, #beaglepilot.Would be possible to being working in the community bonding period. Coding started and trying to pull the timeline as up as possible leaving voids to do more :) Already started coding and the discussion at #beaglepilot (Freenode). The mentors provided great feedback and tutorials to get started. The goal will be to get familiar with ArduPilot and start coding drivers (userspace ones at the beginning) for the hardware to be used (PixHawk Fire Cape).
May 19th - May 25th Device tree generation. Create a test script to check if all pins required have been initialised to their appropriate modes. use beaglebone pru driver lib to upload firmware using remotproc Hardware drivers coding (userspace) over the ArduPilot code (Linux kernel with RT_PREEMPT patches applied).
May 26th - June 1st PPM & PWM generation Create data handling library for PRU0, PRU1 and ARM Hardware drivers coding.
June 2nd - June 8th PPM & PWM generation " Code of hw tests. Make sure that all the hardware interfaces properly.
June 9th - June 15th PPM & PWM generation Port Starterware Library to PRU Realtime comparison: stock kernel userspace vs RT_PREEMPT kernel userspace (desirable to include tests with Xenomai if the time allows it)
June 16th - June 22nd PPM & PWM generation " ROS integration through MAVLink (using mavlink_ros ROS package). This first task is expected to be straightforward.
June 23rd - June 29th Mid-Term evaluations " (Midterm Eval) ROS bridge coded directly in the ArduPilot code as an optional module.
June 30th - July 6th PPM-SUM Create driver library (along with firmware) for Pixhawk Firecape sensors(PRU side) ROS bridge coded directly in the ArduPilot code as an optional module.
July 7th - July 13th PPM-SUM " ROS-Ardupilot tests.
July 14th - July 20th SPI using the PRU Create driver library for Pixhawk Firecape sensors(ARM side) i.e. Ardupilot AP_HAL compatible IDE integration, web programming. Probably Codiad or Cloud9 (http://erlerobot.com/blog/programming-a-flying-robot-in-the-browser/).
July 21st - July 27th SPI using the PRU Intensive testing of Pixhawk Firecape with Ardupilot ported Security review of Ardupilot running on a RT_PREEMPT patched kernel.
July 28th - August 3rd GCS Final housekeeping Security issues.
August 4th - August 10th GCS Live Test and Documentation Overall review an tutorials development.
August 11th - August 18th Final evaluations Live Test and Documentation Wrap-up, documentation and delivery.

测试平台:

BeaglePilot项目目前可通过以下解决方案获得:

致谢

如果没有许多人的支持,例如Kevin Hester,Lorenz Meier,Ben Nizette,Jimmy Johnson和Daniel Frenzel,这项工作是不可能实现的。特别感谢APM开发人员,特别是Andrew Tridgell,这是我们主要的支持和指导来源。我们也希望代表Beagleboard.org开发人员Jason Kridner,Pantelis Antoniou及其社区提供的绝佳支持。作者还要感谢Beagleboard.org,Google,3DRobotics和Erle Robotics提供财务手段和资料。

通讯&资源:

访问我们IRC频道




相关问题推荐